|
Support
TV Connection |
 |
This section describes how to connect a Satcruiser to
a TV set. |
- Connect the Cable/TV antenna coax cable to the TV
" antenna input" of the Sat
Cruiser.
Connect the LNB/LNBF coax cable to the "Digital" input of the receiver.
Connect the " TV Output" of the Satcruiser to the TV set or to the VCR.
Set the television set to channel 3/4. The switch on the back of the Sat Cruiser
determines the channel 3/4 setting.
Verify the connection by turning the Sat Cruiser power on, then press the menu key, the
menu should appear on the screen.
|
 |
|
|
|
